7 Best GPU Coolers in 2022

Building a perfect gaming PC is really a pain as well as a matter of interest. Not only do you have to spend hours searching for the best accessories, but you also have to manage it for its proper work. So, after doing hours of hard work, your PC sometimes might fail to run a graphics-loaded game; or it stops working just because of a small accessory required to cool it down, and this is where you need the best cooling solution by employing a high-end GPU cooler.

After installing the best graphics card, like RTX 3080 or a 3090, on a powerful motherboard, the next step you need for a high-end gaming experience is to look for the perfect cooling system for the GPU and CPU. For your convenience and to save time searching for the AIO or liquid GPU cooler, we’ve done this job for you. With these graphics card coolers, your PC will remain extraordinarily cool even under heavy graphics MOBA or FPS games, especially Fortnite, CS: Go, Call of Duty: Warzone, Far Cry, or any other titles you play. Besides, you’ll be able to stream gaming on Twitch or Discord without a GPU heating problem.

Best GPU Coolers 2022

The cooler we’ve discussed in the best GPU coolers are the most recommended and highest rated. We’ve tried to add cooler from different categories ranging from Air Coolers or blowers to AIO Coolers. This simple accessory will definitely cool down the GPU hardware to a workable temperature. So, it is time we dive into the list of the best GPU coolers in 2022.

  1. DEEPCOOL Castle 360EX
  2. Corsair Hydro X Series
  3. NZXT Kraken G12
  4. ID-Cooling Frostflow 120 VGA
  5. Raijintek Morpheus
  6. ARCTIC Accelero Xtreme IV
  7. GDSTIME Graphic Card Fans

1. DEEPCOOL Castle 360EX

Best liquid cooler with decent performance

ModelGamer Castle 360EX
No of Fans3 (360 mm)
Fans Speed500 – 1800 RPM
RGB lightingYes
Noise Level≤ 32.1 dBA
Dimensions15.8 x 4.7 x 1.1 inches
CompatibilityAll GPUs
MSRP(Check Latest Price)
Reasons to Buy
  • Good GPU clearance and memory
  • Liquid cooling with anti-leak tech
  • Decent RGB illumination
  • Better cooling performance
  • Easy to set up
Reasons to Avoid
  • Expensive
  • Performance seems lower than 240 mm AIOs
  • The RGB lighting is not for everyone

The Deepcool Castle 360EX is a new all-in-one liquid cooling option that features an anti-leak technology. Instead of using lit-up fans and pumps like on the other models, the pump has been redesigned. It’s more appealing to those who want RGB lighting but don’t want too much flair either because it only uses LEDs for its pump design rather than having them illuminated as well.

The Castle 360EX AIO liquid cooling system has an FPI (fins per inch) count of 20. The tubing on this cooler measures out to 465 mm, and it also comes equipped with sleeved tubing and a bladder and pressure release valve that makes up their anti-leak technology. It features RGB LEDs and swiveling fittings that allow for optimal cooling performance in any orientation, whether vertically or horizontally oriented.

The Gamer Storm Castle 360EX has no flaws in my sample unit, and the radiator is clean with no bent fins. It also features fewer milling marks than most as of late because it has pressure adjustment technology called “Anti-leak” by Deepcool. I appreciate quality aspects after using it on my new PC build for gaming purposes.

Despite having a high price point, the performance of this cooler is moderately good. It performs similarly to other liquid coolers on the market I have seen, which disappoints me since many people are paying for its 360 mm design. The noise levels are within the bearable range and work great even you push the CPU to overclock.

Final Thoughts

The Deepcool Gamer Storm Castle 360EX might be the perfect option for gamers looking to get a closed-loop liquid cooler that offers decent performance, RGB lighting, and acceptable noise levels.

2. Corsair Hydro X Series

Best liquid cooling mechanism with RGB fascination

Corsair Hydro X
ModelCorsair Hydro X Series XG7
TypeGPU Water Block
No of Fans0
Fans SpeedDepends on the installed GPU fan
RGB lightingYes
Noise LevelNone
Dimensions267 × 120 × 18 mm
CompatibilityNvidia RTX Series
MSRP(Check Latest Price)
Reasons to Buy
  • Great cooling capabilities
  • Compatible with high-end RTX series GPUs
  • Programmable RGB
Reasons to Avoid
  • Not compatible with AMD GPUs
  • RGB works only in the Corsair ecosystem

There is no denying the fact that Corsair manufactures high-end gaming peripherals. From Cases to the RAMs, every gaming product the company has developed is worth considering and durable. The Hydro X Series by Corsair is a testament to the company’s reputation and dedication to manufacturing high-end peripherals. The Hydro X Series is a total conversion liquid cooling block for your Nvidia GeForce RTX series, especially the RTX 3070 cards, to keep your GPU temperature under control.

Using this liquid cooling block, you can fully explore the true potential of the ray-tracing capable GPUs. This CNC-milled nickel-plated copper block features an aluminum backplate and is shrouded with the fascinating RGB lighting for amazing cooling and stunning looks.  With more than 50 high-density cooling fins located over the GPU, the setup offers the maximum performance of the GPU by a substantial reduction in temperature. The good thing is that not just your GPU remains cool with this block, your graphics card’s RAM and VRM also remain under controlled temperature.

What makes it different from other cooler blocks is the addition of 16 RGB LEDs installed directly into the GPU block. This gives you complete freedom over customizing the RGB lighting by using Corsair’s iCUE software. Besides, you can sync the lighting pattern with other Corsair accessories to give it a unique look.

The bright side of the block is that you don’t need to modify the RTX cards because it is designed to fit almost all the premium RTX series, including RTX 2080 Super, RTX 2080 Ti, RTX 2070 Super, RX 5700 and XG7 2080 FE. The block completely covers your card’s PCB and protects the sensitive components. Besides, the pre-applied thermal strips facilitate you in installing the block with ease.

The only downside with this GPU cooling block is that it is compatible with the RTX series only. No other cards by AMD or Nvidia can be used with this setup. So, bear in mind before you go buying for this block.

Final Thoughts

Overall, the Corsair Hydro X series is the best liquid GPU cooling block that gives an excellent thermal solution for your RTX GPU. This is designed for gaming enthusiasts who want to use a custom loop for high-end GPUs.

3. NZXT Kraken G12

A good combination of kit + cooler for a moderate cooling

ModelNZXT Kraken G12
TypeMounting kit + cooler
No of Fans1 (92 mm)
Fans SpeedUp to 1500 RPM
RGB lightingNo
Noise Level23.5 – 25 dBA
Dimensions201 x 113 x 32 mm
CompatibilityNvidia GeForce, AMD Radeon
MSRPFor kit (Check Latest Price)
Reasons to Buy
  • Highly compatible with popular cards
  • High-end cooler
  • Mounting kit itself is cheap
Reasons to Avoid
  • Requires Kraken X-Series AIO fans
  • Expensive to complete

NZXT isn’t a new name in manufacturing high-end gaming accessories. The company is as old as the best gaming PCs. Jokes aside, the company is top-rated, and the Kraken G12 by NZXT is one of the most powerful cooling units to keep the temperature of the GPU under control. If you are looking for an AIO liquid cooler that comes in handy in performance, don’t set your eyes away from NZXT Kraken G12.

The unit features a 92mm fan that delivers active cooling of VRM on your card. Boasting a 1,500 RPM fan speed, the fan revolves silently with the help of the rifle bearings. As a result, the fan provides 40% extra cooling than a normal cooling unit.

This cooling unit fits in your graphics card to allow an AIO cooler to be adjusted. The good thing is its great compatibility because it can work with a range of reference and non-reference designs to accommodate almost all GPUs available in the market.

Kraken G12 supports more than 50 GPUs as well as over 30 liquid cooling systems. The company claims the cooler can be locked with all the graphics cards, including MSI, Nvidia, Gigabyte, and the GPUs ranging from Nvidia cards of RTX 2060 Super to AMD cards like RX 480 and 5830.

As this is the mounting unit to provide cooling, you can convert it into an AIO cooler. For this purpose, you just need to get an AIO cooler from the Kraken X series. Just like the Arctic Accelero, the G12 is also pricier than the normal mounting units, and this is due to the premium performance and quality the company attaches to its products.

In my experience, I have used this mounting kit on the Nvidia RTX 2080 Super Founders Edition, and the performance was excellent. Neither I faced problems in installing the unit, nor did I experience issues like a noisy fan and overheating.

Final Thoughts

The NZXT also offers 2 years of full warranty with Kraken G12 to ensure that the unit is durable enough to endure the highest temperature of the GPU. Overall, the G12 is the best AIO liquid cooler supporting almost all the powerful GPU cards available in the market.

4. ID-Cooling Frostflow 120 VGA

Affordable Option with great compatibility for all GPUs

ModelID-Cooling Frostflow 120 VGA
TypeAIO liquid cooler
No of Fans1 (120 mm)
1 (92 mm)
Fans Speed800 – 1500 RPM
RGB lightingNo
Noise Level25 dBA
Dimensions154×120×27 mm
CompatibilityRTX 20 Series, 10 series
AMD 5000 series
MSRP(Check Latest Price)
Reasons to Buy
  • Sleek and simple design
  • Great compatibility for CPUs and GPUs
  • Good cooling performance
Reasons to Avoid
  • Not ideal for overclocking

I admit a name like ID-Cooling might be surprising as it may not hold weight against other popular companies. But, believe me, some of the products the company has produced are worth considering, and the Frostflow 120 VGA cooler is one of those options you can think about.

Featuring a simple and minimalist design with matte-black color, the ID-Cooling Frostflow 120 GPU cooler might not appeal to you. The cooler comes with a simple red LED fan and logo that give some sort of color to your GPU, which obviously isn’t as fascinating as offered by RGB coolers. Even without the RGB, the design doesn’t feel disappointing.

Yet, the extraordinary performance and great price point make it the best GPU cooler available in the market. The ID-Cooling Frostflow 120 GPU cooler is fully compatible with all the Intel and AMD chipsets to ensure that you’ll not face issues while installing it in the case. The cooler features a 120mm single fan with 800-2,000 RPM speed which is at par with Arctic Accelero Xtreme but 500RPM higher than NZXT Kraken G12.

With this fan efficiency, the cooler works well on every ground. While running in normal mode, the cooler keeps CPU and GPU temperature at a normal level. Temperature, however, may touch high when you are overclocking. However, this can be managed by increasing the speed of the fan to an acceptable level. However, remember that the cooler might not help you beyond the limits as this is the best budget pick, which is not good for overclockers. For higher overclocking, go for a premium option to take an extra load.

While comparing the cooler with its competitors, the ID-Cooling Frostflow 120 GPU cooler drops the temperature by 30% more than the default air cooling system of AMD RX 5700. It works just the same as the Kraken G12.

Final Thoughts

Overall, this is the most affordable AIO cooling system for GPU that offers relatively better performance than normal underrated coolers. Games requiring low temperature and less graphical performance can be run using this card, but for overclocking, this might not be the perfect option for you.

5. Raijintek Morpheus

Best cooling capacity and perfect heat dissipation

ModelRaijintek Morpheus
TypeHeatsink + Cooler
No of Fans2 (120 mm)
Fans SpeedDepends on the installed fans
RGB lightingNo
Noise LevelNone
Dimensions254 × 98 × 44 mm
CompatibilityAny GPU
MSRP(Check Latest Price)
Reasons to Buy
  • Big VRM heatsink
  • Effective cooling capacity and heat dissipation
  • Low price
Reasons to Avoid
  • No fans
  • Requires good understanding of customization
  • Complicated installation

Of all the VGA coolers, the most stable performing cooler is none other than RAINJINTEK MORPHEUS. The cooler features two top-of-the-line Noctua NF-F12 fans and two heat pipes for better and consistent performance in intensive gaming.

Combined with aluminum and copper heatsinks, the cooler works perfectly. The 12 heat pipes measuring 6mm diameter deliver a cooling capacity of up to 360 watts. Like the ID-Cooling cooler, the RAINJINTEK MORPHEUS is also a non-RGB model lacking a fascination with color lighting.

I think this is basically a heatsink that comes with two cooler. You have to alter your GPU due to its large size, which is the big drawback if you have a GPU protected with a warranty, but the performance and efficiency are actually the silver linings of this cooler.

However, if cooling is your priority, this one is the right choice as it is extremely effective in its cooling. The heatsinks work flawlessly without producing noise even under heavy load.

As far as compatibility is concerned, the card is compatible with a bundle of cards, including the 1080Ti, 980, and R9 Fury, to name a few.

Final Thoughts

Overall, the heatsink is excellent in performance to allow you to be the master of gaming. Sadly it is poor and complicated in installing on the GPU. So, get help from a professional before installing this product to avoid future complications.

6. ARCTIC Accelero Xtreme IV

Excellent cooling with three fans for heat dissipation

ModelARCTIC Accelero Xtreme IV
TypeGPU Cooler
No of Fans3 (92 mm)
Fans SpeedUp to 2000 RPM
RGB lightingNo
Noise Level23.5 – 25 dBA
Dimensions288 x 104 x 54 mm
CompatibilityNvidia GeForce, AMD Radeon
MSRP(Check Latest Price)
Reasons to Buy
  • Excellent cooling
  • 6-years of warranty
  • No thermal glue on your cards
  • Silent operation
  • Affordable
Reasons to Avoid
  • Massive size
  • Difficult to install

If you are looking for the best-in-class air-cooled GPU cooler, the Arctic Accelero Xtreme IV is the perfect choice you can make. Just like its feature, the thing is a beast occupying a huge space in your case. So, before you think of buying it, make sure you have enough space in your case for its accommodation.

On the design side, the Accelero Xtreme IV allows you to mount the cooler in the case without using the thermal paste. Also, it comes with three 92mm fans combined with an MX-4 compound and a cooling capability of 300 watts. This never lets your GPU exceed threshold limits.

The performance and features make Accelero Xtreme IV a bit more expensive than its competitors. Compared to the GTX 1080Ti founders Edition, this GPU cooler is stable and cools the GPU by up to 30 degrees Celsius. Besides, modern PWM control, a new fan controller, and low noise impellers make the cooler extremely silent. That’s why the cooler works quietly and delivers noise-free performance even when running at 100 percent.

The first downside of the Accelero Xtreme IV is the higher price than normal coolers. The second is the hectic and complicated installation process. You need to be careful while installing and setting up the Xtreme IV to avoid future complications.

As the card is pricey, don’t use it for low-profile cards and those with elongated PCB to avoid incompatibility issues. The cooler is undoubtedly compatible with almost all of the high-profile cards like the above RTX 2060 Titan X, RTX 2070 Super, RTX 2080 Super, and RX 480; for more details about compatibility, you can visit the specs page.

Final Thoughts

The Accelero Xtreme IV is one of the VGA coolers that deliver extra cooling for uninterrupted high-end gaming. Last but not least is the 6 years warranty making it a future-proof graphics card cooler. Get this highest performance GPU cooler if the price is the second priority, and what matters the most for you is the cool GPU to get the job done.

Still, confused about which cooler is appropriate for you? See our detailed guide on Liquid VS Air Coolers for CPU.

7. GDSTIME Graphic Card Fans

Simplistic design at a budget price

ModelGDSTIME Graphic Card Fans
TypeGPU fans
No of Fans2 (92mm)
Fans SpeedDepends on the installed GPU fan
RGB lightingYes
Noise Level26.0 dBA
Dimensions7.3 x 4.9 x 1.2 inches
CompatibilityAll GPUs
MSRP(Check Latest Price)
Reasons to Buy
  • Excellent airflow
  • 2 fans are combined into one
Reasons to Avoid
  • Lacks demanding features
  • Boring design

If simplicity and affordability are your prime preference with no RGB or other features, the FDSTIME Graphic Card Fans are the perfect choice you can make. The fans do the cooling job at an affordable price tag.

Measuring at 185 x 120 x 30 mm (L x W x H), the two fans offer a sufficient cooling solution for normal to high-end games. The fans come with a rated current is 0.2 Amp and a voltage of DC 12V. Even with this power, the fans brilliantly run at the speed of 2000 RPM.

To their full potential, the fans run smoothly and produce noise up to 27 dBA. I think the noise is bearable compared to other noisy blocks that run very loud under high load. The fans can be installed on the motherboards with one of the 3-pin or 4-pin interfaces.

The package comes with a D-type interface cable that offers four interfaces and runs with three different voltage powers: 5V, 7V, and 12V. Every voltage power allows fans to run in different ways, including speeds, airflow, and noise. Depending on your system requirements and gaming mode, you can select the appropriate voltage power for the fan.

Final Thoughts

Overall, the fans are good for those who want to save some bucks and look for simple yet effective fans for their GPUs.

Other than the best GPU coolers, you might also need one of these accessories:

GPUs Cooler: All that you need to know

Having an all-in-one GPU cooler is an efficient way to cool down your computer or gaming pc. If you don’t have a GPU cooler, your pc might fail to run or stop working altogether. Due to the increasing demand for gaming accessories, many top brands have started providing multiple choices that will not disappoint you.

Have you come across the Arctic Accelero Xtreme IV that comes with three different fans along with a cooling capacity of 300 watts? Have you seen ID-Cooling frost flow 120 VGA with a minimalist design and great pricing? Or how can we even miss the Corsair Hydro X Series, a liquid GPU cooler that amazingly helps you control your GPU’s temperature without worry? 

Did you see how every GPU Cooler has its unique specifications and unique features distinguished from other coolers? But wait, are you still confused? We understand how tricky it can be to determine which GPU cooler suits you the best when you have multiple options. There’s no need to worry, as all you have to do is follow this excellent buying guide and purchase a highly affordable, reliable, and the best GPU cooler.

Continue to read below to find which the best GPU cooler for gaming is. GPU coolers are great for overclockers. If you are planning to hit high clock speed on your high-end GPU, fitting a liquid cooling block or a heat sink would improve your overclocking results.


GPU coolers come with a wide variety of features. You can get your GPU cooler with RGB elements. And if you are planning to get the GPU coolers for gaming with RGB elements, you need to make sure that the lights on the cooler can be programmed with an RGB header or with the motherboard software. If don’t, you will be poked with some pre-programmed cycles. These cycles may through your entire build-out of the sync.

You will also get one that will ascend on the PCB of your GPU. Getting a GPU cooler is an ideal way to get the best temperature. You will see massive improvements if your VGA cooler blows air directly on the fans of your GPU. Buy a GPU cooler only if you have a high-end GPU for gaming. Using a GPU cooler for GTX 1650 or GTX 1660 Ti Would be nothing but a waste of money.


You may face some compatibility issues even though you have made your PC familiar with all other main components along with the fan controllers. As you will need to have a room for the cooler, the size of the cooler would be a flagrant thing to consider before buying one. Some coolers are equipped with design while some are not. Compatibility differs by the coolers and their brands. Rather than relying on listings, you should go to the manufacturer’s website to buy one.

Look at the performance

One of the most important features when purchasing a GPU cooler is the performance and cooling it offers. A GPU cooler provides you with a high-end gaming experience as by using GPU coolers, your gaming pc will remain cool and keep on functioning despite the usage of heavy graphics for games.

Furthermore, the best GPU cooler for gaming comes with multiple fans and low noise impellers, making the cooling process silent and not noisy. The extra cooling from the GPU cooler will help you enjoy gaming sessions for long hours at a stretch without any interruptions.

A GPU cooler will also help you cool down your desktop computer if you’re at the edge of a game or in the middle of rendering a video. The significant part is that because GPU coolers provide silent cooling, you won’t even have to listen to the fan making noise or the blades moving. Isn’t that a relief?

What about the noise?

You will be delighted to know that most of the GPU Coolers mentioned operate silently and do not make any noise. They come with low noise impellers, which make the cooler extremely silent. This means that you don’t have to worry about the noise while you’re in the middle of an intense game or an important project.

However, Bear in mind that using a fanless GPU cooler to avoid noise is not recommended as your graphics card will overheat without a fan, and it can prove very harmful to your system.

Hybrid or AIO?

If you opt for the best AIO GPU Cooler, it will be a relief as these all-in-one coolers do not require maintenance as they come with a closed lid. You can’t refill AIO coolers like other coolers, but the good part is that they drastically improve GPU Cooling as they have more cooling potential when compared to other coolers.

On the other hand, a hybrid GPU cooler carries the heat from your GPU to a radiator, then transferred it into the air. A hybrid cooler is a practical choice as it minimizes the heat radiation and keeps the temperatures low.

Liquid or Passive?

If you want to go for a liquid GPU cooler, you should know that the GPU can easily be overclocked with liquid cooling and an entire cover water block. Also, it helps to maintain the high core frequency, performance drops, and thermal throttling. With a liquid GPU cooler, you will get the same benefits as the water was used on a GPU.

However, if you want to choose the passive GPU cooler, it is better if your goal is to reduce noise and maintain complete silence. It will run all the time silently, but it might shut down or throttle if it turns too hot. This can be a little problematic as it can affect the flow and continuity of your game.

Have you decided between an aftermarket, low profile, and closed loop GPU cooler?

An aftermarket GPU Cooler can be the ultimate solution for your overheating GPU as they cool down your hardware to a temperature where you can operate the device. The aftermarket cooler can be pretty expensive, but you can be assured that the cooler will work effectively and provide you with the results you need.

Are you wondering what a low-profile GPU Cooler is? Let me tell you. A low-profile GPU Cooler is used for graphic cards that draw less power from the motherboard than regular graphic cards. Similarly, a low-profile GPU Cooler is required for such a graphic card as it does not need additional cooling and can work just fine with low cooling.

Now coming to the closed-loop GPU Cooler. This GPU Cooler refers to a pre-built cooler that you don’t need to assemble or put together as it already comes in a ready-to-use state. You have to attach it to the system, which requires cooling, and you’re good to go. Moreover, it comes with a lid that you cannot open, and you do not need to fill it with any liquid. 


Are you looking for the best GPU Cooler for r9 that too at an affordable and budget-friendly price? No need to worry. We can make that happen. All the GPU Coolers mentioned have been handpicked, especially after thorough research and detailing. There is no need for you to worry much about this pricing as all these GPU Coolers fall in a reasonable price range.

But if you need some more help and are still confused, we are more than happy to guide you with our expert advice. You can opt for the ID-Cooling Frostflow 120 VG, which is an affordable option. It features a minimalist and straightforward design along with extraordinary performance and a simple red LED fan.   

Types of GPU Coolers

We are not going to explain the methods to keep your device from running hot. First, we will explain the types of GPU coolers. Choosing a GPU cooler is as tough as choosing the right VRAM or right case fans—it all depends upon your preference. Most of the GPU coolers use liquids or air. Each cooler has its weaknesses and strengths.

If you are buying a new graphics card, you will see several models with various descriptions. The GPU coolers are commonly classified into three types: Blower, Open Air, and AIO coolers. Each of these coolers removes the heat produced in GPU, under some workload, using a fan or a heat sink. This is the most basic principle used in almost all laptops and PCs. The fans present on your PC case do the same thing the GPU cooler does. The intake fans bring in cool air, and the outtake fans eject the hot air produced by the computer under working pressure.

1. Open Air:

Open-air coolers are probably the most common type of cooler found out there in the market. The aftermarket or AIB cards are made by companies such as EVGA, Sapphire, XFX, Gigabyte, MSI, and many others if the chip manufacturers produce the source cards. These companies also make blower coolers, but you will find a wide variety in the open-air coolers.

The open-air coolers are based on simple logic. It is a cooler with single, double, or triple fans that intake the cold air from outside and blow it on the heat sink, to directly or indirectly make your GPU cool. The radiators in these coolers usually contain fins that consist of some running heat pipes through them. Blower coolers generally use smaller heat sinks, so the cooling capacity of these coolers is also smaller.

When the cold air becomes hot, it is depleted in all directions, but mostly inside the case. This means that the gathered heat must somehow be removed; otherwise, it will spread in the case making all the components heat up. An open airflow system is important in every case, especially in smaller cases if it contains an open-air cooler inside.

At least one intake and outtake are good for every system but not for the GPU. A frequent flow of air through the chassis would help the cold fresh air to reach both the CPU cooler and the GPU, resulting in cooler temperatures on the graphics cards.

2. Blower Style:

The blower coolers are the coolers that are used on most reference graphics cards. This cooler features a single fan design. It works effortlessly. The front fan of the cooler inhales the cold air and exhales it out of the back of the single fan. It is important to note that all blower coolers utilize the single fan design, but all the single fan-designed cards are blower style.

The feature of exhausting air from the back of the card helps in cases with poor airflow; however, there is no hot air inhaled in that case. The air volume is so small that the fans need to spin faster to cool down the GPU. As a result, blower coolers are mostly liable to higher temperatures and noise levels. The blower coolers are mostly used in multi GPU setups or mini-ITX cases, where insufficient case airflow is present.

3. AIO Coolers:

The All-in-one or AIO coolers have one major advantage over any air-cooled card, which is exhaust control. The blower-style coolers run hotter than the AIO coolers and the open-air coolers, where the liquid-cooled cards tend to be on average with open-air coolers.

The external radiator design of this cooler has one main function. It gives you the performance of open-air cards and exhaust outside the case benefit of the blower coolers. This feature makes the AIO cards pleasing to use with limited airflow. And one can still get the most out of it by overclocking the graphics card. The AIO coolers are also known as hybrids, give you the most features of both worlds. They contain a radiator, fans, and a water block that is easier to deal with than the liquid cooling loop.

You should know that all the coolers mentioned above will allow the graphics card to work, depending on the case airflow. It will either be slightly better or worse. Most users find the open-air coolers best because of their noise, thermals, performance, and value. The AIO and blower coolers can prove to be very advantageous where the airflow is limited. The AIO cooler beats all the pricey coolers out in the market.

GPU Coolers FAQs

Do I need a GPU cooler?

A GPU Cooler is required to ensure that you have an inflow of cool air and an outflow of hot air from the GPU. A GPU Cooler also helps your GPU run faster and efficiently, and it makes sure that a certain temperature is maintained. It ensures that your system does not lag or stop working during a game, so you don’t lose any critical data.

How to install a GPU cooler?

It is pretty simple and does not require much effort. It would be best if you started at the installing and then securing the baseplate. Once that has been done, then move towards installing the fans on the radiator. Make sure that you install the fans correctly so that they can function without lagging. Install and secure the radiator next and sort out all the wires and cables and attach them properly. Finally, make some adjustments to the pump, attach the clips, and start the GPU Cooler.

How to maintain an AIO GPU water cooler?

For any GPU cooler to function correctly, it requires a check to avoid glitches in the future. The convenient part is that you only need the radiator and the fans in an AIO GPU Cooler. A regular information is necessary so that if any dust particles get stuck inside, they can be removed immediately. There is no need to maintain or open the pump as it has a closed lid that can’t be opened.

Which GPU cooler is better, blower or open air?

Looking for the best GPU cooler for Mini ITX can be difficult if you don’t have enough knowledge about what’s good. A blower-type GPU Cooler dumps the heat outside, so it doesn’t affect the temperature much. Moreover, blowers have limited heat sink ability and have smaller fans. If you need extra cooling for the GPU, the blower GPU Cooler won’t prove effective.
On the other hand, an open-air GPU Cooler has 10 to 15% better performance than a blower GPU Cooler. It maintains and promises lower temperatures so that the GPU can continue functioning. Similarly, it has improved overclocking, making your PC run faster and increasing your graphics card and processor speed. However, a slight drawback is that instead of taking out the heat, it leaves the heat inside.

Which GPU manufacturer has the best cooler?  

The Arctic Accelero Xtreme IV can be considered the best GPU Cooler type for the HTPC case as it comes with three fans combined with an MX-4 compound and a cooling capacity of 300 watts. It never lets your GPU overheat, and as compared to other GPUs, it remains stable and cools down the GPU up to 30 degrees. It also includes a new fan controller and low noise impellers, making the cooling process extremely silent.

How does a GPU cooler work?

If you’re tired of your GPU overheating while you are gaming, it’s time you search for the best GPU Cooler for Micro ITX to make your life easier. If you’re new to this product, there’s no need to worry as we will help clear any confusions you might have.
A GPU Cooler takes in air from the fan and then spreads that hot air over the heat sink. Then warm air is expelled into the case’s interior and from the front and bottom of the graphics card. This enables the GPU cooler to work faster and continue cooling down the graphics card without delay.

Photo of author

Mathew Bradford

Hey! Mathew Bradford Here, A proud member of GamingExpert Team. I love playing games with new gaming gadgets. Our team is here to help you find the best gaming products, reviews of videos games and to help you decide which one is best for your. You can contact me if you need further assistance.

1 thought on “7 Best GPU Coolers in 2022”

  1. NZXT G12 doesn’t need Kraken AIO’s, I’m using one on an RX 590 with a TT Ring 3.0 120mm (It does the trick, keeps temp down to 58C under load). If you check the compatability list, There are quite a few other OEM AIO systems listed. It seems the restriction for the AIO is a round top on the die plate to fit the bracket.

Comments are closed.